关于薄壁金刚石钻头胎体性能的探讨

对薄壁金刚石钻头胎体进行了性能分析和配方设计探讨，尤其根据被钻切介质对钻头胎体性能的要求作了较详细的分析，从理论分析结合实践经验筛选出了钻切建筑石材和各种钢筋砼的钻头胎体配方，在生产中满足了钻头工作条件的要求。     

Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.     

新疆地区土地覆被遥感数据的一致性研究

鉴于新疆地区对中国乃至中亚有着特殊的战略意义,本文针对不同数据源及分类系统在土地覆被数据的空间分布上缺乏互通性问题,结合2010年目视解译土地利用现状遥感监测数据、GlobeLand30和GlobCover2009共3种土地覆被数据,采用类型相似分析、类型混淆分析、混淆矩阵分析、空间一致性分析4种方法开展精度评价及一致性分析,以期对土地覆被数据在中国西北干旱区的适用性及适用范围提供有效建议。结果表明,3种土地覆被数据对新疆地区土地覆被类型构成基本一致,且对裸地类型的辨识度最高;新疆地区中高度一致区域占新疆总面积的95%;3种数据两两对比时,总体精度在64.11%~72.57%之间,其中目视解译数据/GlobeLand 30组合表现出最高水平,且仍有提高空间,反映出目前相同卫星传感器是提升精度评价结果的重要因素之一,且不同分类系统、分类方法、空间分辨率及卫星过境时间等因素对精度评价结果也会产生巨大影响。为解决此类问题,利用多源土地覆被遥感数据的融合技术提高数据精度,或是利用深度学习对遥感影像资料进行精确地解译和判读,将是今后全球土地覆被制图及应用领域的主要发展趋势。     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

一种采用基础矩阵描述的核线影像生成方法

设计了一种采用基础矩阵的立体像对核线影像制作方法,由基础矩阵来描述影像间的相对方位关系,避免了相对定向过程中复杂的迭代过程。通过稀疏匹配获取高精度的同名点,由基础矩阵确定每组同名点对应的同名核线,根据核线必相交于核点的原理,采用最小二乘法确定左右影像的核点坐标;然后根据核点坐标完成影像间核线的快速映射,沿核线方向采用双线性内插法进行核线重采样,完成核线影像制作。采用多组影像进行核线影像制作实验,对生成的核线影像进行同名特征点提取与匹配,结果表明采用该方法制作的核线影像上下视差较小,验证了方法的有效性。     

2000～2015年会理县地表覆盖变化监测

以LandSat多时相影像为数据源,采用基于规则的面向对象分类方法,监测会理县2000～ 2015年地表覆盖变化.结合1∶50 000 DEM数据,分析了会理县地表覆盖构成与转移、变化动态度及潜在退耕地情况.监测分析结论能为会理县加强空间管制、促进土地资源集约利用、指导生态文明建设等提供决策信息支撑.     

求解GM(1,1)模型新总体最小二乘算法

在GM(1,1)模型中系数矩阵和观测向量都是由原始序列组成的。系数矩阵中同样是有误差的,与观测向量中的误差一样,亦来源于原始序列,即它们误差同源。不同位置的相同元素应该有相同的改正数,采用传统总体最小二乘求解则不能达到此目的。针对这一缺陷,推导了一种新的总体最小二乘算法;并且通过算例验证了新方法的可行性和有效性。     

Preservation of coal-waste geochemical markers in vegetation and soil on self-heating coal-waste dumps in Silesia,Poland

Occurrence and distributions of geochemical markers on vegetation and in soils covering two self-heating coal waste dumps were investigated with gas chromatography-mass spectrometry (GC–MS) and compared with those of bitumen expelled on the coal waste dump surface. Presence of biomarkers, alkyl aromatic hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), and such polar compounds as phenols indicate that components of self-heating coal wastes indeed migrate to soils and plants surface and their characteristic fingerprints can be applied in passive monitoring to investigate migration of contaminants from self-heating coal wastes. Moreover, results allow to discriminate between the Upper- and Lower Silesian coal basins, notwithstanding value shifts caused by heating. Mechanisms enabling the migration of geochemical compounds into soils include mixing with weathered coal-waste material, transport in gases emitted due to self-heating and, indirectly, by deposition of biomass containing geochemical substances. Transport in gases involves mostly lighter compounds such as phenols, methylnaphthalenes, methylbiphenyls, etc. Distributions and values of geochemical ratios are related to differences in their boiling temperatures in the case of lighter compounds but preserve geochemical features in the case of heavier compounds such as pentacyclic trierpanes.     

A new assessment model for evacuation vulnerability in urban areas

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.     

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.